相關模具的生產質量要想好就需要在注塑加工環節中多下功夫，比如說技術要求方面是要嚴格遵守相關準則的，這樣才不會容易出問題，那么相關模具注塑加工的技術要求如何？
The production quality of the relevant mold needs to be good in the injection molding process, such as technical requirements are to strictly comply with the relevant guidelines, so it will not be easy to go wrong, so how about the technical requirements of the injection molding process of the relevant mold?
在相關模板加工過程中，各環節的操作人員應根據相關模板加工工藝的材料型號、規格、尺寸和施工圖進行加工。施工過程不清時，立即停止下道工序的加工，下道工序前及時咨詢現場技術人員。
In the process of the related template processing, the operator of each link should process according to the material model, specification, size and construction drawing of the related template processing technology. When the construction process is not clear, stop the processing of the next procedure immediately, and consult the on-site technical personnel before the next procedure.
相關模板加工的重點和關鍵環節。工藝、站臺和相關模板的焊接應個人負責，工藝和零件在工藝過程中出現質量問題時，應采取必要的預防措施，防止不必要的質量返工。
Focus and key link of related template processing. Welding of process, platform and related formwork shall be the responsibility of the individual, and necessary preventive measures shall be taken to prevent unnecessary rework of quality when quality problems occur in process and parts.
相關模板的成型需要在模具上進行。對于螺栓孔的裝配，應預先擰緊裝配螺栓孔，以防止裝配螺栓孔或其他相鄰零件尺寸的錯位。在相關模板加工過程中。各環節操作人員應注意施工人員，加工機械，加工半成品，配件意外損壞的可能，提前做好防范。
The forming of the related template needs to be carried out on the mold. For the assembly of bolt holes, the assembly bolt holes should be tightened in advance to prevent the size dislocation of the assembly bolt holes or other adjacent parts. In the processing of related templates. Operators of all links should pay attention to the possibility of accidental damage of construction personnel, processing machinery, semi-finished products and accessories, and take precautions in advance.
濟南注塑加工廠家認為，在相關模板制作過程中，面板的角度應在折彎機上彎曲。當不需要圓角半徑時，彎曲半徑應為鋼板厚度的1.5倍。部分剛性輪胎模具進行施工，成型筋組裝焊接-筋拉直檢查-骨架組裝定位焊接-組裝成對面板焊接成型。
The Angle of the panel should be bent on the bending machine during the related formwork. When fillet radius is not required, the bending radius should be 1.5 times the thickness of the plate. Part of the rigid tire mold construction, forming bar assembly welding - bar straightening inspection - skeleton assembly positioning welding - assembly of panel welding molding.
許多廠商和團隊需要與企業建立合作關系，以實現互利共贏的目標。很多人在考量廠家是否值得合作時，想到的是商業經濟利益，即模具加工廠家提出的合作價格，這方面還是要多注意。更多內容了解就來網站
www.xjfff.com吧。
Many vendors and teams need to establish cooperative relationships with enterprises to achieve mutually beneficial goals. When many people consider whether manufacturers are worthy of cooperation, they think of commercial and economic interests, that is, the cooperation price proposed by mold processing manufacturers, which should be paid more attention to. For more information, visit www.xjfff.com.
