注塑模具是很嚴格的工作，成本很高，所以要防塵防銹防壓。模具生產后，應檢查防銹，按規定放在模架上，并按《模具使用、維護和保養規范》的要求使用模具，防止因人為疏忽造成模具損壞，延長模具使用壽命，確保生產順利，產品質量穩定。
Injection mold is a very strict work, the cost is very high, so to dust, rust and pressure. After mold production, should check anti-rust, according to the regulations on the mold rack, and according to the "Mold use, Maintenance and maintenance specifications" requirements to use the mold, to prevent human negligence caused mold damage, prolong the service life of the mold, ensure smooth production, stable product quality.
目前國內大多數塑料加工廠的模具管理還沒有系統的標準模式，管理辦法是根據各廠的規模和特點制定的。中小企業和大企業，和非的塑料廠有不同的管理方法。然而，它們在基本實踐和預期目的上是相似的。企業應根據自身特點和實際情況建立管理制度，使模具在管理中得到妥善保管，達到預期的使用壽命。
At present, there is no systematic standard mode for mold management of most plastic processing plants in China, and the management method is formulated according to the scale and characteristics of each plant. Small and medium-sized enterprises and large enterprises, professional and non-professional plastic factories have different management methods. However, they are similar in basic practice and intended purpose. Enterprises should establish management system according to their own characteristics and actual situation, so that molds can be properly kept in management and reach the expected service life.
注塑模具存放處應平整、干燥、清潔，便于起吊和搬運。小模具可以按順序排列存放，大模具可以直接放在墊子上。分開存放時，應把相同產品的模具放在一起。由于每個單元的實際情況和條件不同，很難強加具體的存儲方法，但注意事項是相似的。
The storage place of injection mould should be smooth, dry and clean for lifting and handling. Small molds can be stored in order, large molds can be placed directly on the mat. When storing separately, the molds of the same product should be put together. It is difficult to impose specific storage methods because of the different realities and conditions of each cell, but the considerations are similar.
大多數注塑模具在使用中受到操作人員的重視，但在儲存過程中經常被忽略。但是在實際生產中，經常會出現模具存放不良，導致生產損失嚴重的情況，需要引起重視。
Most injection moulds are valued by operators in use, but often ignored in storage. However, in the actual production, there will often be poor storage of molds, resulting in serious production losses, which needs to be paid attention to.
注塑模具的存儲和管理是注塑行業的一項重要工作。如果注塑模具的存放管理不到位，注塑模具會生銹損壞。找模具或者用錯模具甚扔掉都需要很長時間。所以不管怎么樣，只要您做了注塑模具這個事情，就需要重視起來。還有問題的話就來
http://www.xjfff.com咨詢吧。
Injection mold storage and management is an important work in injection molding industry. If the storage management of injection molds is not in place, they will rust and be damaged. Finding the mold or using the wrong mold or even throwing it away can take a long time. So anyway, as long as you do the injection mold this thing, you need to pay attention to it. If you have any questions, go to http://www.xjfff.com.
